1/10 1. scope of application these specifications are applied to the chip type led lamp, model cl-l233-mc13ww1-c. 2. part code c l - l 2 3 3 - m c 1 3 w w 1 - c series l233 : white power led for general lighting. special specifications m : general color rendering index typ. 85 type. watt class c13 : 13 watt package. lighting color ww1 : compliance with ansi c78.377-2008, 3-step macadam ellipse, correlated color temperature 3500k. symbol citiled name data sheet cl-l233-mc13ww1-c citizen electronics co.,ltd. japan ref.ce-p1093 04/11
2/10 3. outline drawing 4. performance ( 1 ) absolute maximum rating symbol unit power dissipation p d w forward current i f ma forward pulse current i fp ma *1 reverse current i r ma operating temperature t op c storage temperature t st c junction temperature tj max c *2 *1 forward current : duty<=1/10 , pulse width<=10msec *2 d.c. current : tj = tc + rj-c p d pulse current : tj = tc + rj-c pw(power dissipation / one-pulse) duty symbol data sheet parameter rating value 32.8 1,440 citizen electronics co.,ltd. japan citiled name cl-l233-mc13ww1-c 1,500 -30 ~ +85 150 -40 ~ +100 1 marking1 marking2 it has a protection device built in as a protection circuit against static electricity. unit : mm tolerances unless otherwise specified : 0.3 anode cathode protection device 12 12 12 marking1 : serial no. marking2 : m ww ww1 e.g m : typ.85 color e.g. ra ref.ce-p1093 04/11
3/10 ( 2 ) electro-optical characteristics ( tc=25 c ) symbol condition min. typ. max. unit v f i f =720ma 17.5 18.6 21.0 v v i f =720ma 854 1005 - lm ra i f =720ma 80 85 - - rj-c junction-case - 2.4 - c/w chromaticity coordinates ( condition : i f =720ma ,tc=25 c ) note: the tolerance of measurement at our tester is v f 3% , v10% , chromaticity(x,y)0.005. symbol cl-l233-mc13ww1-c citizen electronics co.,ltd. japan citiled name data sheet thermal resistance parameter forward voltage luminous flux general color rendering index reference (ansi c78.377) x y x y 0.4073 0.3917 center 0.4073 0.3917 (3465k) a 0.4299 0.4165 a 0.00951 b 0.3996 0.4015 b 0.00417 c 0.3889 0.3690 ? 52.97 d 0.4147 0.3814 *color region stay within macadam "3-step" ellipse from the chromaticit y center. *the chromaticity center refers to ansi c78.377:2008. please refer to ansi c78.377 for the chromaticity center. * is the angle between the major axis of the ellipse and the x-axis , and a and b are the major and minor semi-axes of an ellipse. (r ef. iec 60081:1997 annexd) ww1 color rank color rank ww1 center oval parameter x-y chart-cie1931 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.38 0.39 0.40 0.41 0.42 0.43 0.44 x y color region color region (ansi) b.b. locus 3300k 3900k 3500k 3100k 3700k ref.ce-p1093 04/11
4/10 5. characteristics ? forward current vs. forward voltage ? forward current vs. relative luminous flux ? forward current vs. chromaticity coordinate ? case temperature vs. chromaticity coordinate symbol cl-l233-mc13ww1-c citizen electronics co.,ltd. japan data sheet name citiled -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 300 600 900 1200 1500 i f [ma] ?x, ?y ?x ?y 0% 30% 60% 90% 120% 150% 180% 0 300 600 900 1200 1500 i f [ma] relative luminous flux [a.u.] 16.0 17.0 18.0 19.0 20.0 21.0 0 300 600 900 1200 1500 i f [ma] v f [v] -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 20 40 60 80 100 120 140 tc [c] ?x, ?y ?x ?y i f =720ma tc=25c tc=25c tc=25c ref.ce-p1093 04/11
5/10 ? case temperature vs. forward voltage ? case temperature vs. relative luminous flux ? spectrum symbol ? case temperature vs. allowable forward current data sheet citiled name cl-l233-mc13ww1-c citizen electronics co.,ltd. japan 16.5 17.0 17.5 18.0 18.5 19.0 19.5 0 20 40 60 80 100 120 140 tc [c] [v] 0% 20% 40% 60% 80% 100% 120% 0 20 40 60 80 100 120 140 tc [c] relative luminous flux [a.u.] 0% 20% 40% 60% 80% 100% 120% 350 450 550 650 750 850 [nm] relative emission intensity [a.u.] 0 200 400 600 800 1000 1200 1400 0 25 50 75 100 125 150 tc [c] i f [ma] i f =720ma i f =720ma tc=25c,i f =720ma ref.ce-p1093 04/11
6/10 6. reliability (1) details of the tests (2) judgment criteria of failure for reliability test (ta=25 c) symbol v f v u defines the upper limit of the specified characteristics. s defines the initial value. cl-l221-c14l1 reliability test results will be used for cl-l233-mc13ww1-c. symbol -40 c 30 minutes C 100 c 30 minutes, 100 cycle > u 1.1 citizen electronics co.,ltd. japan forward voltage i f =720ma < s 0.85 measuring item measuring condition ta=25 c, i f =720 ma 1000 hours(with al-fin) ta=80 c, tj P 120 c, i f =720 ma 1000 hours(with al-fin) moisture-proof test 60 c, 90 %rh for 1000 hours continuous operation test low temperature storage test judgment criteria for failure test item test condition data sheet citiled name cl-l233-mc13ww1-c note: measurement shall be taken between 2 hours and 24 hours, and the test pieces should be -40 c 1000 hours high temperature storage test 100 c 1000 hours thermal shock test i f =720ma returned to the normal ambient conditions after the completion of each test. total luminous flux ref.ce-p1093 04/11
7/10 7. packing specifications (1) packing an empty tray is placed on top of a five-tier tray which contain 40 pieces each. the set of six trays is banded together with two rubber bands. (smallest packing unit: 200 pieces) a label with product name, quantity, lot number is placed on the upper empty tray. tray (dimensions: 310 210 14.6mm / materials: electrically conductive ps) symbol data sheet citiled name cl-l233-mc13ww1-c citizen electronics co.,ltd. japan < packing figure > product 40pcs/tray 310 210 14.6 14.6 1. type e.g. cl-l233-mc13ww1-c 2. p.no. (cutomer's p/n) e.g. xxx 3. lot no. e.g. 03d001 - first letter: last digit of the year e.g. 0 : year 2010 - second letter: production month e.g. 3 : m ar note: october, november and december are designated by x, y and z, respectively. - third letter: ce's control number e.g. d001 4. quantity e.g. 200 pieces < example of indication label > customer pass citizen electronics type p.no lot no q'ty cl-l233-mc13ww1-c xxx 03d001 200 pcs. ---(1) ---(2) ---(3) ---(4) ref.ce-p1093 04/11
8/10 8. precautions 1. avoid the application of any stress to the resin portion. 2. avoid any contact by a sharp metal nail or other materials with the resin portion. 3. this product should be secured firmly by fastening an m3 screw on both sides of the product. please be careful not to apply any stress to the product during the clamping operation. please check thoroughly. 4. insulation between the terminal section and the heat sink section of the led is not covered by warranty. with regard to insulation after this product has been assembled in an apparatus, preventive action should be carried out by the customer. 5. for fixing this product to the outer heat sink, heat grease should be applied to the whole rear surface so that the product can dissipate heat as a whole. please pay attention to avoid product deformation when conducting the clamping operation with heat grease in sheet form. 6. handling of static electricity - these products are sensitive to static electricity charge. please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - all devices, equipment and machinery must be properly grounded. it is recommended that precautions be taken against surge voltage to the equipment that mounts the leds. - esd sensitivity of this product is 1000v (hbm, based on jeita ed-4701/304). - when inspecting the final products in which leds were assembled, it is recommended to check whether the assembled leds are damaged by static electricity or not. - it is easy to find static-damaged leds by a light-on test. symbol judgmental criterion citiled name cl-l233-mc13ww1-c condition as the connection status could vary depending on materials of outer heat sink, data sheet i f =12ma/pkg no-lighting in entire block making up parallel circuit is unacceptable citizen electronics co.,ltd. japan resin portion (shaded area) l233 consists of three blocks. recommended installation screw pitch thermal conduction materials (insulation) outer heart sink spring washer ( Q 6mm) m3screw (insulation) plane washer ( Q 6mm) 19.5mm 11.0mm ref.ce-p1093 04/11
9/10 8. precautions (continued) symbol 11. recommended soldering condition (this product is not adaptable to reflow process) - as this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. - factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. thus, drive conditions should be taken into consideration, depending on ambient temperature (ta). citizen electronics co.,ltd. japan data sheet - manual soldering - soldering shall be implemented using a soldering bit of 40w or less with a temperature 350c or less within 3.5 seconds for one land. - this product complies with rohs directives. - contacts number of soldering bit should be within twice for each terminal as a correction. * citizen electronics cannot guarantee if usage exceeds this recommended conditions. please use it after sufficient verification is carried out on your own risk if necessary. 9. drive circuit 12. other please ensure that heat generation is not in excess of the absolute maximum rating. (refer to 4-1 performance) - no external force shall be applied to resin part during soldering. (recommended condition in a case of lead-free solder condition) applied to this product instantaneously when the circuit is on or off. 10. heat generation 7. lighting at a low current a minimum current value of lighting of all dice is 60ma. when a minimal current is applied, led dice may look different in their brightness due to the individual difference of the led element, and it is not a failed product. 8. please be aware that this product should not come into contact with any other parts in assembled status. - a constant current circuit is recommended as a drive circuit. and when two or more led packages are connected, the series connection between each package is recommended. - please design a circuit that prevents any reverse voltage (excess current) from being citiled name cl-l233-mc13ww1-c - for soldering correction - regarding soldering correction, above conditions shall be used. - next process of soldering should be carried out after the product has returned to ambient ref.ce-p1093 04/11
10/10 such information, however, is subject to change without any prior notice. included in this document, business interruption and loss of data, and disclaims any and all express or implied warranties and for providing adequate designs and safeguards to minimize risk and avoid situations symbol 9. precautions with regard to product use data sheet please confirm the latest product information with a citizen electronics' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production. products are used as intended. citizen electronics neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any any other 1. this document is provided for reference purposes only so that citizen electronics' a result of errors or omissions in the information included in this document. but citizen electronics assumes no liability whatsoever for any damages incurred as rights of citizen electronics or any third party with respect to the information before purchasing or using any citizen electronics' products listed in this document, in this document. 2. all information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. 3. citizen electronics has used reasonable care in compiling the information 4. absent written signed agreement, except as provided in the relevant terms and conditions of or conditions of merchantability, fitness for a particular purpose, accuracy of information, citizen electronics assumes no liability for customers' product design or applications. bodily injury or damage to property, including data loss or corruption. in addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. in which a malfunction or failure of a product could cause loss of human life, 5. though citizen electronics works continually to improve products' quality and reliability, sale for product, and to the maximum extent allowable by law, citizen electronics assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, products can malfunction or fail. customers are responsible for complying with safety standards and conditions related to sale, use of product, or information, including warranties or no infringement. name cl-l233-mc13ww1-c citizen electronics co.,ltd. japan 6. please contact citizen electronics' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries. citiled ref.ce-p1093 04/11
|
